Description: Occurs when the generator attempts to start multiple times without success.
Action: Check if the gas is on. If the issue persists, contact an authorized service dealer.
Description: Indicates the generator is running at higher RPM than normal.
Action: Possible defective ignition coils. Contact an authorized service dealer.
Description: Appears when oil pressure is low.
Action: Check and adjust the oil level as per the owner’s manual. If the issue continues, a service call is needed.
Description: Steps to safely shut down the generator during a utility outage.
Action: Follow the detailed steps provided, including setting utility and generator disconnects to OFF and removing the 7.5A fuse from the controller.
Description: Indicates an issue with detecting the engine’s RPMs.
Action: Clear the alarm, remove some loads, and try restarting. If it doesn’t start, place a service call.
Description: Triggered when the correct RPM is not detected by the controller.
Action: Contact an authorized service dealer.
Description: Indicates a sudden drop in voltage.
Action: A service call is required.
Description: Appears when an overload condition is detected.
Action: Remove the load. If the problem persists, a service call is necessary.
Description: Suggests an issue with the battery voltage.
Action: Check the battery voltage and the charge circuit. Recharge if below 12.5 VDC.